Konica Minolta AccurioPress C14000 Plockmatic PowerSquare R2L User Manual - Page 65
Procedure - Store, Step 4 - remove the outer book supports
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
4 - Jobs - Remove and re-fit the Side-Trimmer Book Supports Step 4 - remove the outer book supports There are two outer book supports. Remove one at a time. Hold each end of the outer book support and lift upwards. Remove the outer book support through the top of the machine. Repeat with the other outer book support. Outer book support Procedure - Store Step 1 - store the inner book supports Put the inner book supports in the store bracket that is located inside the side-trimmer, above the outfeed. Use the spring clips to attach the supports to the bracket. Step 2 - store the outer book supports Hold the outer book supports together as shown. Insert the outer supports between the inner supports. The spring clip nuts insert into the cut-outs in the outer supports. Plockmatic PowerSquare™224 User Manual 59