Konica Minolta AccurioPress C14000 Plockmatic PowerSquare R2L User Manual - Page 139
Feed the Stitch-wire, BASIC, STITCHES
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
6 - Maintenance - Install New Stitch-wire Feed the Stitch-wire Step 1 2 3 4 5 Action Information Touch START Set the number of stitches to 6. Hand-feed or print an A4 or larger size test job. Check the stitch-wire is loaded. Reset the number of stitches on the touch screen. Touch BASIC > STITCHES. Enter the correct settings on the touch screen, according to the size and thickness of the job. The stitch-wire loads automatically during the stitch head cycle. Check that a stitch is made. If needed, repeat the previous step. If a stitch is still not made, repeat the procedure "Install the Stitchwire into the Stitch Head" on page 132. Plockmatic PowerSquare™224 User Manual 133
6 - Maintenance - Install New Stitch-wire
Plockmatic PowerSquare™224 User Manual
133
Feed the Stitch-wire
Step
Action
Information
1
Touch START
2
Set the number of stitches to 6.
Touch
BASIC
>
STITCHES
.
3
Hand-feed or print an A4 or larger
size test job.
Enter the correct settings on the
touch screen, according to the size
and thickness of the job.
The stitch-wire loads automati
-
cally during the stitch head cycle.
4
Check the stitch-wire is loaded.
Check that a stitch is made.
If needed, repeat the previous
step.
If a stitch is still not made, repeat
the procedure “Install the Stitch-
wire into the Stitch Head” on
page 132.
5
Reset the number of stitches on
the touch screen.