Konica Minolta AccurioPress C14000 Plockmatic PowerSquare R2L User Manual - Page 96
See The Side, See Remove
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
5 - Troubleshooting - Message List Message Information Reference Side trim axis moving The side-trim axis is moving. This message clears when the adjustment is complete. If the message does not clear: Open and then close the top cover of the side-trimmer. See "Remove and re-fit the SideTrimmer Book Supports" on page 56. Then, if necessary, open the top cover of the side-trimmer and check for paper trimmings or obstructions. Close the top cover of the side-trimmer. If the message still does not clear, use the side-trimmer mains ON/ OFF switch. Turn the side-trimmer OFF, wait at least 5 seconds and then turn the side-trimmer ON. If the problem continues, then call your service engineer. SIDE TRIM COVER OPEN The top cover of the side-trimmer is open. Close the top cover of the sidetrimmer. If the message does not clear, open and then close the top cover of the side-trimmer. See "Remove and re-fit the SideTrimmer Book Supports" on page 56. If the message still does not clear, use the side-trimmer mains ON/ OFF switch. Turn the side-trimmer OFF, wait at least 5 seconds and then turn the side-trimmer ON. If the problem continues, then call your service engineer. SIDE TRIM - no comms Check that the mains power input See "The Side- cable and the communications Trimmer" on cable are connected. page 8. Use the side-trimmer mains ON/ OFF switch. Turn the side-trimmer OFF, wait at least 5 seconds and then turn the side-trimmer ON. If the problem continues, then call your service engineer. STACKER FULL The stacker is full. Unload the books from the stacker. 90 Plockmatic PowerSquare™224 User Manual