Konica Minolta AccurioPress C14000 Plockmatic PowerSquare R2L User Manual - Page 134
Lubricate the Wire-feed Cam, See
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
6 - Maintenance - Lubricate the Stitch Head Step 1 2 Action Information Apply a thin line of grease from the See FIGURE 71. tube, 20mm long, to the visible surface of the driver bar. The line of grease must be a maximum of 0.5mm thick and as shown in FIGURE 71. Note: Apply the grease in an upward direction, from the bottom of the driver bar. 20mm long x 0.5mm thick Note: Only apply the grease as shown. If you apply additional grease, the paper gets marked. Fit the wire holder. Lubricate the Wire-feed Cam Nozzle of the tube of grease Wire-feed cam FIGURE 73. Lubricate the wire-feed cam Feed lever Step Action Information 1 Apply 10mm of grease from the See FIGURE 73. tube between the bearing surface of the wire-feed cam and the feed lever. 2 Lower the PowerSquare 224 main deck. 10mm 128 Plockmatic PowerSquare™224 User Manual