Konica Minolta AccurioPress C14000 Plockmatic PowerSquare R2L User Manual - Page 90
Flow Error - Out
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
5 - Troubleshooting - Message List Message Information Reference ERROR - No Comms FLOW ERROR BRIDGE FLOW ERROR - FORMER FLOW ERROR GATHER AREA FLOW ERROR - OUTFEED FLOW ERROR STITCHER Fold blade axis moving FOLD BLADE NOT PARKED Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. There is an error at the connecting bridge. Open the connecting bridge cover and check for a paper jam. See "Jam in the Connecting Bridge" on page 94. Touch STOP to clear the message from the screen. There is an error at the former. Open the folder cover and remove the book. If necessary, open the main deck to remove the book. See "Jam in the Folder or Former Area" on page 96. There is a paper jam in the gather- See "Jam in the ing area. Open the gathering area Gathering Area" and remove the paper jam. on page 95. There is an error at the outfeed. Remove the trim bin and open the trim stop guard to remove the book. See "Jam in the Trim Area" on page 99. If necessary, open the main deck to remove the book. There is an error at the stitcher. See "Jam in the Open the folder cover and remove Stitch Area" on the book. page 96. If the problem continues, then call your service engineer. The fold blade axis (book thickness adjustment) is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. Open the folder cover, remove the paper, close the folder cover. Touch START , then follow the instructions on the screen. See "Open and Close the Folder Cover" on page 41. Caution: If you feel any resistance when you open the folder cover stop immediately, then call your service engineer. 84 Plockmatic PowerSquare™224 User Manual