Konica Minolta AccurioPress C14000 Plockmatic PowerSquare R2L User Manual - Page 91
GATHER MTR - No, position. Touch START
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
5 - Troubleshooting - Message List Message Information Reference FOLD - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. FORM CLAMP CLOSED The form clamp is in the wrong position. Touch START to reset the position. Follow the instructions on the screen. FORM ROLLER ERROR Open the folder cover, remove the See "Jam in the paper, close the folder cover. Folder or Former Area" on page 96. FORM ROLLER NOT PARKED The form roller is in the wrong position. Touch START to reset the position. Follow the instructions on the screen. FORM CLAMP ERROR There is an error at the former. Open the folder cover and remove the book. If necessary, open the main deck to remove the book. See "Jam in the Folder or Former Area" on page 96. GATHERING AREA COVER OPEN Close the gathering area cover if you need to operate the machine online. GATHER MOTOR STALL Check for a paper jam in the Gathering area. • Touch STOP to stop the PowerSquare 224. • Clear the paper jam. • Touch STOP to clear the message from the screen. • Continue the print job. GATHER MTR - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer INVERTER ERROR Check for a paper jam and clear if See "Paper Jams" necessary. on page 94. Touch STOP to clear the message from the screen. If the problem continues, contact your Plockmatic service engineer. Plockmatic PowerSquare™224 User Manual 85