Konica Minolta AccurioPress C14000 Plockmatic PowerSquare R2L User Manual - Page 66
Procedure - Refitting, Step 3 - store the centre book support, Step 1 - preparation
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
4 - Jobs - Remove and re-fit the Side-Trimmer Book Supports Step 3 - store the centre book support Use the spring clips to attach the centre book support to the bracket on the inside of the top cover. Procedure - Refitting Step 1 - preparation Use PAPER SIZE to set the paper width to 365mm. Then use SIDE TRIM to set the side-trim dimension to 365mm. See "PAPER SIZE" on page 26. See "SIDE TRIM" on page 28. Open the top cover of the Side-Trimmer. See Figure 39 on page 57. Step 2 - fit the inner and outer book supports There are two outer book supports and two inner book supports. Re-fit one at a time. Refer to the illustrations on page 56. On each book support, there are semicircular cut outs at each end. Position the cut-outs over the fixing points. Press down on the book support so that it fits onto the fixing points. Fixing Repeat with the other book supports. Cut-out 60 Plockmatic PowerSquare™224 User Manual