Konica Minolta AccurioPress C14000 Plockmatic PowerSquare R2L User Manual - Page 94
REMOVE SET - GATH, Folder or Former
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
5 - Troubleshooting - Message List Message Information Reference MANUALLY PARK SHUTTLE The shuttle is not parked correctly. Open the folder cover and move the shuttle to the park position. Close the folder cover. The shuttle will reset. When the message list is clear, continue operation. See "Manually park the Shuttle" on page 111. MISSING STITCHES The machine has detected missed stitches. Check if the stitch-wire is jammed or if the stitch-wire spool is empty. See "Clear a Stitch-wire Jam" on page 102 or see "Install New Stitch-wire" on page 130. MOTOR CONTROLLER The drive motor controller is not NOT READY ready. If the problem continues, contact your service engineer. OPERATOR MAINTENANCE The machine needs routine main- See "Operator tenance by the operator. Maintenance" on page 113. REBOOT THE MACHINE Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. REMOVE SET FROM FOLD AREA Open the folder cover and remove See "Jam in the the set. Folder or Former Area" on page 96. REMOVE SET - GATH- Open the gathering area and ERING AREA remove the sheets. See "Jam in the Gathering Area" on page 95. REMOVE SET STITCH AREA Open the folder cover and remove See "Jam in the the set. Stitch Area" on page 96. Rotate axis moving The rotate axis is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. ROTATE - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. 88 Plockmatic PowerSquare™224 User Manual