Konica Minolta AccurioPress C14000 Plockmatic PowerSquare R2L User Manual - Page 34
SIDE TRIM, SIZE, TRIM SIZE, TRIM OFFSET, to select the default side-trim position.
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
3 - The User Interface - The BASIC Window Button Information SIDE TRIM The side-trim dimension is calculated automatically according to the PAGE SIZE. If needed, the side-trim dimension can be changed. Touch SIDE TRIM to adjust the size of the finished book. The default setting is 2.5mm from each side. The maximum side-trim is 40mm from each side. The minimum side-trim is 1mm from each side. The machine will not permit a setting that conflicts with the stitch position. Change the stitch pitch if necessary. The side-trim function can be turned off. - AUTO Touch AUTO to select the default side-trim position. - TRIM SIZE Touch '+' or '-' to adjust the side-trim dimension. - TRIM OFFSET By default, the book is trimmed equally on both sides. Touch '+' or '-' to move the trim position away from the centre line. The range is -40mm to +40mm, dependent on how much is to be trimmed. The default setting is 0mm. 28 Plockmatic PowerSquare™224 User Manual