Konica Minolta AccurioPress C14000 Plockmatic PowerSquare R2L User Manual - Page 88

Message, Information, Reference, BRIDGE - No Comms

Get Konica Minolta AccurioPress C14000 PDF manuals and user guides View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

5 - Troubleshooting - Message List Message Information Reference BOOK DELIVERY TOO FAST - PBS Bridge axis moving Books are being delivered to the stacker too fast. This error can happen when you insert books into the stacker by hand. Press the reset button on the stacker. If the problem continues, then call your service engineer. The bridge axis is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. BRIDGE INFEED COVER OPEN BRIDGE MOTOR STALL BRIDGE - No Comms CENTRE - No Comms Centre axis moving The bridge infeed cover is open. The machine will not operate until the cover is closed. Check for a paper jam in the connecting bridge. • Touch STOP to stop the PowerSquare 224. • Clear the paper jam. • Touch STOP to clear the message from the screen. • Continue the print job. Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. The centre axis in the bridge is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. See "Jam in the Bridge Infeed" on page 94. See "Jam in the Connecting Bridge" on page 94. 82 Plockmatic PowerSquare™224 User Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
5 - Troubleshooting - Message List
82
Plockmatic PowerSquare™224 User Manual
BOOK DELIVERY TOO
FAST - PBS
Books are being delivered to the
stacker too fast. This error can
happen when you insert books into
the stacker by hand. Press the
reset button on the stacker. If the
problem continues, then call your
service engineer.
Bridge axis moving
The bridge axis is moving. This
message clears when the adjust
-
ment is complete.
If the message does not clear,
touch
ADVANCED
>
RE-REF
.
BRIDGE INFEED
COVER OPEN
The bridge infeed cover is open.
The machine will not operate until
the cover is closed.
See “Jam in the
Bridge Infeed” on
page 94.
BRIDGE MOTOR
STALL
Check for a paper jam in the con
-
necting bridge.
•
Touch STOP
to stop the
PowerSquare 224.
•
Clear the paper jam.
•
Touch STOP
to clear the
message from the screen.
•
Continue the print job.
See “Jam in the
Connecting
Bridge” on
page 94.
BRIDGE - No Comms
Use the mains ON/OFF switch.
Turn the machine OFF, then turn
the machine ON.
If the problem
continues, then call your service
engineer.
CENTRE - No Comms
Use the mains ON/OFF switch.
Turn the machine OFF, then turn
the machine ON.
If the problem
continues, then call your service
engineer.
Centre axis moving
The centre axis in the bridge is
moving.
This message clears
when the adjustment is complete.
If the message does not clear,
touch
ADVANCED
>
RE-REF
.
Message
Information
Reference