Lexmark X6575 User's Guide (Mac) - Page 180
Can receive but not send faxes, Check the Dial Prefix setting
UPC - 734646066440
View all Lexmark X6575 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
Check the Auto Answer button If the Auto Answer light is on: • The printer will answer after the preset number of telephone rings. • If you are using a distinctive ring, see "Setting the distinctive ring" on page 79. Check ink Check the ink levels, and install a new cartridge if necessary. Check whether Fax Forwarding is selected 1 From the control panel, press Fax Mode. 2 Press . 3 Press or repeatedly until Fax Setup appears. 4 Press . 5 Press or repeatedly until Ringing and Answering appears. 6 Press . 7 Press or repeatedly until Fax Forward appears. 8 Press . 9 Press or repeatedly to view the current Fax Forwarding setting. 10 To turn off Fax Forwarding, press or repeatedly until Off appears. 11 Press to save the setting. Can receive but not send faxes These are possible solutions. Try one or more of the following: Check mode selection To make sure the printer is set for faxing, press Fax Mode. Check document placement Load the original document faceup into the Automatic Document Feeder tray, or facedown on the scanner glass. Check the Dial Prefix setting 1 From the control panel, press Fax Mode. 2 Press . 3 Press or repeatedly until Fax Setup appears. 4 Press . 5 Press or repeatedly until Dialing and Sending appears. 6 Press . Troubleshooting 180