Lexmark X6575 User's Guide (Mac) - Page 19

Loading transparencies You can load up to 50 transparencies at a time. 1 Load transparencies with the rough side facing you. If the transparencies have a removable strip, each strip should face away from you and down toward the printer. 2 Make sure: • The transparencies are loaded in the center of the paper support. • The paper guides rest against the edges of the transparencies. Notes: • Transparencies with paper backing sheets are not recommended. • Transparencies require more drying time. Remove each transparency as it exits, and allow it to dry to avoid ink smudging. Related topics: • "Printing transparencies" on page 26 Loading iron-on transfers You can load up to 10 iron-on transfers at once, but you will achieve best results loading them one at a time. 1 Load iron-on transfers with the print side of the transfer facing you. 2 Make sure: • You follow the loading instructions that came with the iron-on transfers. • The transfers are loaded in the center of the paper support. • The paper guides rest against the edges of the transfers. Related topics: • "Printing iron-on transfers" on page 25 Loading custom-size paper You can load up to 100 sheets of custom-size paper at a time. 1 Load paper with the print side facing you. 2 Make sure: • The paper size fits within these dimensions: Width: - 76.0-216.0 mm - 3.0-8.5 inches Length: - 127.0-432.0 mm - 5.0-17.0 inches • The stack height does not exceed 10 mm. • The paper is loaded in the center of the paper support. • The paper guides rest against the edges of the paper. Printing 19