Netgear DGN2200M DGN2200M User Manual (PDF) - Page 111
Factory Default Configuration
UPC - 606449072433
View all Netgear DGN2200M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition User Manual Factory Default Configuration You can use the Restore Factory Settings button on the bottom panel of your router to restore factory default settings. Press this button for 6 seconds. Your router will return to the factory configuration settings shown in the following table. Table 17. Factory Default Settings Feature Default Behavior Router Login User login URL http://www.routerlogin.com User name (case-sensitive) admin Login password (case-sensitive) password Internet connection WAN MAC address WAN MTU size Use default address 1492 Port speed Autosensing Local network (LAN) LAN IP Subnet mask 192.168.0.1 255.255.255.0 RIP direction None RIP version Disabled RIP authentication None DHCP server Enabled Local network DHCP starting IP address (LAN) continued DHCP ending IP address 192.168.0.2 192.168.0.254 DMZ Enabled or disabled Time zone GMT for WW except NA and GR, GMT+1 for GR, GMT-8 for NA Time zone adjusted for daylight savings time Disabled SNMP Disabled Firewall Inbound (communications coming Disabled (except traffic on port 80, the HTTP port) in from the Internet) Outbound (communications going Enabled (all) out to the Internet) Source MAC filtering Disabled Appendix A. Technical Specifications and Factory Default Settings | 111