Netgear DGN2200M DGN2200M User Manual (PDF) - Page 78
Configuring LAN Settings, Apply, LAN IP address, Subnet mask
UPC - 606449072433
View all Netgear DGN2200M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition User Manual feature causes *.yourhost.dyndns.org to be aliased to the same IP address as yourhost.dyndns.org. 9. Click Apply to save your configuration. Note: If your ISP assigns a private WAN IP address such as 192.168.x.x or 10.x.x.x, the Dynamic DNS service will not work because private addresses will not be routed on the Internet. Configuring LAN Settings The LAN Setup screen allows configuration of LAN IP services such as DHCP. Note: If you change the LAN IP address of the wireless modem router while connected through the browser, you will be disconnected. You must then open a new connection to the new IP address and log in again. The wireless modem router is shipped preconfigured to use private IP addresses on the LAN side, and to act as a DHCP server. The wireless modem router's default LAN IP configuration is as follows: • LAN IP address. 192.168.0.1 • Subnet mask. 255.255.255.0 These addresses are part of the Internet Engineering Task Force (IETF)-designated private address range for use in private networks, and should be suitable in most applications. If your network has a requirement to use a different IP addressing scheme, you can make those changes by opening the LAN IP Setup screen. Under Advanced in the main menu, select LAN IP Setup. 78 | Chapter 6. Advanced Configuration