Netgear DGN2200M DGN2200M User Manual (PDF) - Page 88
Configuring Universal Plug and Play, Metric, Apply, Turn UPnP On, Advertisement Period
UPC - 606449072433
View all Netgear DGN2200M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition User Manual 6. Enter the IP subnet mask for this destination. If the destination is a single host, type 255.255.255.255. 7. Enter the gateway IP address, which must be a router on the same LAN segment as the router. 8. Enter a number between 2 and 15 as the metric value in the Metric field. This represents the number of routers between your network and the destination. Usually, a setting of 2 or 3 works. 9. Click Apply. The Static Routes table is updated to show the new entry. Configuring Universal Plug and Play Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, access the network and connect to other devices as needed. UPnP devices can automatically discover the services from other registered UPnP devices on the network. 1. Select UPnP on the main menu to display the UPnP screen: 2. Fill in the settings on the UPnP screen: • Turn UPnP On. UPnP can be enabled or disabled for automatic device configuration. The default setting for UPnP is enabled. If UPnP is disabled, the wireless modem router does not allow any device to automatically control the resources, such as port forwarding (mapping), of the wireless modem router. • Advertisement Period. The advertisement period is how often the wireless modem router advertises (broadcasts) its UPnP information. This value can range from 1 to 88 | Chapter 6. Advanced Configuration