Netgear R7900P User Manual - Page 11
LEDs and Buttons on the Top Panel, Table 2. LED and button descriptions - 100
View all Netgear R7900P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Nighthawk X6S AC3000 Tri-Band WiFi Router Model R7900P LEDs and Buttons on the Top Panel The status LEDs and buttons are located on the top of the router. Table 2. LED and button descriptions LEDs and Buttons Descriptions Power Internet 2.4 GHz WiFi 5 GHz WiFi (2) Solid amber. The router is starting. Blinking amber. The firmware is upgrading, or the Reset button was pressed. Solid white. The router is ready. Blinking white. The firmware is corrupted. Off. Power is not supplied to the router. Solid white. The Internet connection is ready. Solid amber. The router detected an Ethernet cable connection to the modem. Off. No Ethernet cable is connected between the router and the modem. Solid white. The 2.4 GHz WiFi radio is operating. Blinking white. The router is sending or receiving WiFi traffic. Off. The 2.4 GHz WiFi radio is off. Solid white. The 5 GHz WiFi radio is operating. Blinking white. The router is sending or receiving WiFi traffic. Off. The 5 GHz WiFi radio is off. USB 3.0 port Solid white. A USB device is connected and is ready. Blinking white. A USB device is plugged in and is trying to connect. Off. No USB device is connected, or someone clicked the Safely Remove Hardware button and it is now safe to remove the attached USB device. Ethernet ports 1-4 The LED color indicates the speed: white for Gigabit Ethernet connections and amber for 100 Mbps or 10 Mbps Ethernet connections. Solid white or solid amber. A powered-on device is connected to the Ethernet port. Blinking white or blinking amber. The port is sending or receiving traffic. Off. No device is connected to this Ethernet port. Hardware Overview of the Router 11