Netgear R7900P User Manual - Page 56
Change an Outbound Firewall Rule, Only This IP Address, IP Address Range, All IP Addresses, admin
View all Netgear R7900P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Nighthawk X6S AC3000 Tri-Band WiFi Router Model R7900P • Only This IP Address. Enter the required address in the fields to apply the rule to a single device on your LAN. • IP Address Range. Enter the required addresses in the start and end fields to apply the rule to a range of devices. • All IP Addresses. All computers and devices on your LAN are covered by this rule. By default, the All IP Addresses radio button is selected. 11. Click the Add button. The new rule is added to the Service Table on the Block Services page. Change an Outbound Firewall Rule You can change an existing outbound firewall rule. To change an outbound firewall rule: 1. Launch a web browser from a computer or mobile device that is connected to the network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Security > Block Services. The Block Services Setup window displays. 5. In the Service Table, select the radio button for the rule. 6. Click the Edit button. The Block Services Setup page displays. 7. Change the settings. For more information about the settings, see Add an Outbound Firewall Rule for a Custom Service or Application on page 55. 8. Click the Accept button. Your settings are saved. The changed rule displays in the Service Table on the Block Services page. Remove an Outbound Firewall Rule You can remove an outbound firewall rule that you no longer need. To remove an outbound firewall rule: 1. Launch a web browser from a computer or mobile device that is connected to the network. 2. Enter http://www.routerlogin.net. A login window opens. Control Access to the Internet 56