Netgear WN203 User Manual - Page 108
Factory Default Settings, Reset to Factory Defaults
View all Netgear WN203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
ProSAFE Single Band 802.11n Wireless Access Point WN203 Table 5. Technical specifications (continued) Feature Description Status LEDs • Power LED • Test LED • LAN LED • WLAN LED Electrical and physical specifications Power adapter 12VDC, 1A; plug is localized to country of sale Power consumption 4.0W Physical specifications • Dimensions (h x w x d): 35 x 133 x 173 mm (1.4 x 5.3 x 6.8 in.) • Weight: 240 g (0.5 lb) Environmental specifications • Operating temperature: 0 to 45°C (32 to 113°F) Operating humidity: 10-90%, noncondensing • Storage temperature: -20 to 70°C (-4 to 158°F) Storage humidity: 5-95%, noncondensing MTBF • At 25°C > 375,000 hours • At 50°C > 125,000 hours Electromagnetic compliance SRRC Factory Default Settings You can use the Reset to Factory Defaults button located on the bottom panel of the wireless access point to reset all settings to their factory default. This is called a hard reset. To perform a hard reset, use a sharp object to press and hold the Reset to Factory Defaults button for approximately 10 seconds. This returns the wireless access point to the factory configuration settings that are shown in the following table. Note: Pressing the Reset to Factory Defaults button for a few seconds simply causes the wireless access point to reboot. Supplemental Information 108