Netgear WN203 User Manual - Page 18
Log In to the Wireless Access Point, Test LED, LAN LED, admin, password, Login
View all Netgear WN203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
ProSAFE Single Band 802.11n Wireless Access Point WN203 Test LED. The Test LED is amber. After about one minute, the Test LED turns off. LAN LED. The LAN LED indicates the LAN speed for the LAN port: green for 1000 Mbps or amber for 100 Mbps or 10 Mbps. WLAN LED. The WLAN LED is blue when the wireless LAN (WLAN) is ready. Log In to the Wireless Access Point The default IP address of your wireless access point is 192.168.0.100. By default, the DHCP client on the wireless access point is disabled so you can log in using the default IP address. To log in to the wireless access point: 1. Open a web browser such as Microsoft Internet Explorer 8.0 or later, or Mozilla Firefox 18.0 or later. 2. Connect to the wireless access point by entering its default address of 192.168.0.100 into your browser (use http and not https). The Login screen displays: 3. Enter the default user name of admin and the default password of password. 4. Click the Login button. The web browser displays the basic General system settings screen under the Configuration tab of the main menu: Installation and Basic Configuration 18