Netgear WN203 User Manual - Page 52
Enable Remote Management, SNMP Management
View all Netgear WN203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
ProSAFE Single Band 802.11n Wireless Access Point WN203 Enable Remote Management This section describes the different options for remote management. • SNMP Management • Secure Shell and Telnet Management Both Simple Network Management Protocol (SNMP) and the remote console Secure Shell (SSH) are enabled by default, which allows for remote management of the wireless access point from a client running SNMP management software, as well as from an SSH client. The Telnet console is disabled by default. SNMP Management The SNMP screen lets you configure the IP address of the SNMP manager, the community names, and the trap information. To set up an SNMP management interface: 1. Select Maintenance > Remote Management > SNMP. The SNMP screen displays: 2. Specify the settings as described in the following table: Setting Description SNMP Select the Enable radio button to allow the SNMP network management software, such as HP OpenView, to manage the wireless access point through SNMPv1/v2 protocol. By default, the Disable radio button is selected. Read-Only Community Name Enter the community string to allow the SNMP manager to read the wireless access point's Management Information Base (MIB) objects. The default is public. Management 52