Netgear WN203 User Manual - Page 38
Wireless Configuration and Security, ProSAFE Single Band 802.11n Wireless Access Point WN203
View all Netgear WN203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
ProSAFE Single Band 802.11n Wireless Access Point WN203 3. Specify the settings of the Profile Definition section of the Edit Security Profile screen as described in the following table: Setting Description Profile Name Enter a unique name of the wireless security profile that makes it easy to recognize the profile. The default names are NETGEAR, NETGEAR-1, NETGEAR-2, and so on, through NETGEAR-7. You can enter a value of up to 32 alphanumeric characters. SSID The wireless network name (SSID) for the wireless security profile. The default names are NETGEAR_11ng, NETGEAR_11ng-1, NETGEAR_11ng-2, and so on, through NETGEAR_11ng-7 for the eighth profile. Broadcast Wireless Network Name (SSID) Select the Yes radio button to enable the wireless access point to broadcast its SSID, allowing wireless clients that have a null (blank) SSID to adopt the wireless access point's SSID. Yes is the default setting. To prevent the SSID from being broadcast, select the No radio button. 4. Specify the settings of the Authentication Settings section of the Edit Security Profile screen as described in the following table. Setting Description Network Authentication Open System and Data Encryption Note: The data encryption fields that display onscreen depend on your selection from the Network Authentication drop-down menu. Shared Key Legacy 802.1X This is the default setting. Use an open system without any encryption or with WEP encryption. For more information, see Configure an Open System with WEP or Shared Key with WEP on page 40. Use WEP encryption and enter at least one shared key. For more information, see Configure an Open System with WEP or Shared Key with WEP on page 40. Configure the RADIUS server settings. Encryption is not supported. For more information, see Configure Legacy 802.1X on page 42. WPA with Radius Configure the RADIUS server settings and select TKIP or TKIP + AES encryption. For more information, see Configure WPA with RADIUS, WPA2 with RADIUS, and WPA & WPA2 with RADIUS on page 42. WPA2 with Radius Configure the RADIUS server settings and select AES or TKIP + AES encryption. For more information, see Configure WPA with RADIUS, WPA2 with RADIUS, and WPA & WPA2 with RADIUS on page 42. Note: Select this setting only if all clients support WPA2. Wireless Configuration and Security 38