Netgear WN203 User Manual - Page 58
Restore the Configuration, Restore the Wireless Access Point to the Factory Default Settings
View all Netgear WN203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
ProSAFE Single Band 802.11n Wireless Access Point WN203 Restore the Configuration IMPORTANT: During the restoration process, do not try to go online, turn off the wireless access point, shut down the computer, or do anything else to the wireless access point until it finishes restarting! To restore your settings from a saved configuration file: 1. Select Maintenance > Upgrade > Restore Settings. The Restore Settings screen displays: 2. Click the Browse button. 3. Locate the backup configuration file (the file name is config). 4. Click the Apply button. The restoration process is initiated. During the restoration process, the wireless access point automatically restarts. The restoration process typically takes about one minute. When the Test LED turns off, wait a few more seconds before doing anything with the wireless access point. Restore the Wireless Access Point to the Factory Default Settings You can restore the wireless access point to the factory default settings by two methods that are described in the following sections: • Use the Web Management Interface to Restore Factory Default Settings • Use the Reset to Factory Defaults Button to Restore Factory Default Settings Management 58