Netgear WN203 User Manual - Page 78
Setting, Description, Profile Definition, Remote MAC Address
View all Netgear WN203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
ProSAFE Single Band 802.11n Wireless Access Point WN203 e. Specify the settings as described in the following table: Setting Profile Definition Profile Name Remote MAC Address Description Enter a profile name that is easy to remember. The default name is NETGEAR-WDS-1. Enter the MAC address of the remote wireless access point (the MAC address of AP2 on LAN Segment 1 in Figure 16 on page 76). Advanced Configuration 78
Advanced Configuration
78
ProSAFE Single Band 802.11n Wireless Access Point WN203
e.
Specify the settings as described in the following table:
Setting
Description
Profile Definition
Profile Name
Enter a profile name that is easy to remember. The default name is
NETGEAR-WDS-1.
Remote MAC Address
Enter the MAC address of the remote wireless access point (the MAC
address of AP2 on LAN Segment 1 in
Figure
16
on page
76).