Netgear WN203 User Manual - Page 77
Configuration > Wireless Bridge, Enable Wireless Bridging
View all Netgear WN203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
ProSAFE Single Band 802.11n Wireless Access Point WN203 To configure a point-to-point wireless network with or without client association: 1. Configure the wireless access point (AP1 on LAN Segment 1 in the previous figure) as a point-to-point bridge: a. Select Configuration > Wireless Bridge. The Bridging screen displays (see the following figure). b. Select the Enable Wireless Bridging check box. The Local MAC Address field is a nonconfigurable field that shows the MAC address of the wireless access point. c. Select the Wireless Point-to-Point Bridge radio button. d. Click the Edit button to configure the security profile settings. The Edit Security Profile screen displays: Advanced Configuration 77
Advanced Configuration
77
ProSAFE Single Band 802.11n Wireless Access Point WN203
To configure a point-to-point wireless network with or without client association:
1.
Configure the wireless access point (AP1 on LAN Segment 1 in the previous figure) as
a point-to-point bridge:
a.
Select
Configuration > Wireless Bridge
.
The Bridging screen displays (see the following figure).
b.
Select the
Enable Wireless Bridging
check box.
The Local MAC Address field is a nonconfigurable field that shows the MAC address
of the wireless access point.
c.
Select the
Wireless Point-to-Point Bridge
radio button.
d.
Click the
Edit
button to configure the security profile settings.
The Edit Security Profile screen displays: