Netgear WN203 User Manual - Page 43
Con Wpa-psk, Wpa2-psk, And Wpa-psk & Wpa2-psk, Wpa2 With Radius, Wpa & Wpa2 With Radius
View all Netgear WN203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
ProSAFE Single Band 802.11n Wireless Access Point WN203 • WPA2 with RADIUS Figure 11. WPA2 with RADIUS • WPA & WPA2 with RADIUS Figure 12. WPA & WPA2 with RADIUS Table 3. Settings for WPA with RADIUS, WPA2 with RADIUS, and WPA & WPA2 with RADIUS Setting TKIP Descriptions Temporal Key Integrity Protocol (TKIP) is the standard encryption method used with WPA. You can also use TKIP with WPA2. AES Note: TKIP provides only legacy (slower) rates of operation. If you want to use the 11n rates and speed, NETGEAR recommends WPA2 authentication with AES encryption. Advanced Encryption Standard (AES) is the standard encryption method used with WPA2. Note: Although some wireless clients might support AES with WPA, the wireless access point does not support WPA with AES. TKIP + AES The TKIP + AES encryption method is supported both for WPA and WPA2. Broadcast packets use TKIP. For unicast (point-to-point) transmissions, WPA clients use TKIP, and WPA2 clients use AES. For the WPA & WPA2 mixed mode, TKIP + AES is the only supported data encryption method. Configure WPA-PSK, WPA2-PSK, and WPA-PSK & WPA2-PSK WPA-PSK, WPA-PSK, and WPA-PSK & WPA2-PSK authentication uses a pre-shared key (PSK, also called a passphrase or a network key) and does not require authentication from a RADIUS server. The selections that are available from the Data Encryption drop-down menu depend on the type of WPA-PSK authentication that you select from the Network Authentication drop-down menu and are shown in the table that follows the figures. • WPA-PSK Figure 13. WPA-PSK Wireless Configuration and Security 43