Netgear WN203 User Manual - Page 21
To con time settings, Configuration > System > Basic > Time, Apply
View all Netgear WN203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
ProSAFE Single Band 802.11n Wireless Access Point WN203 To configure time settings: 1. Select Configuration > System > Basic > Time. The Time screen displays: 2. Configure the settings as described in the following table: Setting Time Zone Description Select the time zone to match your location. Current Time This is a nonconfigurable field that displays the current date and time. NTP Client Enable the Network Time Protocol (NTP) client to synchronize the time of the wireless access point with an NTP server. By default the Enable radio button is selected. Use Custom NTP Server Select this check box if you want to use a custom NTP server. Note: You need to have an Internet connection to use an NTP server that is not on your local network. Hostname / IP Address Enter the host name or IP address of the custom NTP server. The default NTP server depends on the selected time zone. For example, for China the default is time-e.netgear.com. Note: If you use a host name, make sure that you have configured a DNS server. For more information, see the next section. 3. Click the Apply button. Installation and Basic Configuration 21