Netgear WN203 User Manual - Page 62
Enable the Syslog Option, Enable Rogue AP Detection and Monitor Access Points
View all Netgear WN203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
ProSAFE Single Band 802.11n Wireless Access Point WN203 Enable the Syslog Option If you have a syslog server on your LAN, the Syslog screen allows you to enable the syslog option. If syslog is enabled, the wireless access point sends its syslog files to the syslog server. To enable a syslog option: 1. Select Configuration > System > Advanced > Syslog. The Syslog screen displays: 2. Specify the settings as described in the following table: Setting Description Enable Syslog Select the check box to enable the syslog option. By default, the syslog option is disabled. Syslog Server IP Address Enter the IP address of the syslog server to which the wireless access point sends the syslog files. Port Number Enter the port number that is configured on the syslog server. The default port number is 514. 3. Click the Apply button. Enable Rogue AP Detection and Monitor Access Points This section describes how to use the Rogue AP detection feature to provide more security in your wireless network. • Enable and Configure Rogue AP Detection • View and Save Access Point Lists Management 62