Netgear WN203 User Manual - Page 110
Table 6., Default configuration settings continued, Radio and wireless settings, Feature, Description
View all Netgear WN203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
ProSAFE Single Band 802.11n Wireless Access Point WN203 Table 6. Default configuration settings (continued) Feature DHCP server gateway IP address DHCP server IP address lease for clients Radio and wireless settings Operating mode Wireless access point name Country and region Wireless communication Wireless mode Wireless network name (SSID) Broadcast wireless network name (SSID) Radio frequency channels MCS index/data rate (transmission speed) Channel width Guard interval Output power Wireless on/off (radio scheduling) RTS threshold Fragmentation length Beacon interval Aggregation length A-MPDU RIFS transmission DTIM interval Preamble type Description 192.168.0.1 1 (one day) Access point, infrastructure mode netgearxxxxxx, where xxxxxx are the last 6 digits of the wireless access point MAC address Varies by region 2.4 GHz radio enabled 11ng NETGEAR_11ng Enabled 11ng: Auto Best Note: Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. 11ng: 20 MHz Auto Full Disabled 2347 2346 100 65535 Enabled Disabled 3 Auto Supplemental Information 110