Netgear WN203 User Manual - Page 13
Bottom Panel with Product Label and Reset to Factory Defaults Button - default password
View all Netgear WN203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ProSAFE Single Band 802.11n Wireless Access Point WN203 4. Power socket for a 12 VDC, 1A power adapter. 5. Reverse SMA connector for an optional 2.4 GHz antenna. If you have purchased external antennas, see Configure Advanced Wireless Settings on page 70 for information about how to enable the external antennas. Bottom Panel with Product Label and Reset to Factory Defaults Button The product label on the bottom of the wireless access point's enclosure displays factory default settings, regulatory compliance, and other information. The bottom panel also contains the recessed Reset to Factory Defaults button, which is indicated on the product label. 2.4 Ghz Console LAN ProSAFE Single Band 802.11n Wireless Access Point WN203 FCC ID: PY312400222 IC: 4054A-12400221 This device complies with part 15 of the FCC Rules and Canada ICES-003. Operation is subject to the following two conditions: (1) this device may not Reset to cause harmful interference, and (2) this device must accept any interference Factory Defaults received, including interference that may cause undesired operation. Designed by NETGEAR in California http://192.168.0.100 user name: admin password: password MAC SERIAL Made in China Power 12V 1.0A 2.4 Ghz 272-11850-02 Reset to Factory Defaults button Figure 3. Product label on the bottom To reset the wireless access point to factory default settings: Use a sharp object to press and hold the Reset to Factory Defaults button for about 10 seconds. All custom configuration settings are lost, and the default password is restored. For more information, see Restore the Wireless Access Point to the Factory Default Settings on page 58. Introduction 13