Netgear WN203 User Manual - Page 59
Use the Web Management Interface to Restore Factory Default Settings
View all Netgear WN203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
ProSAFE Single Band 802.11n Wireless Access Point WN203 Note: After you have restored the factory default settings on the wireless access point: * All custom configurations are lost. * The login password is password. * The default LAN IP address is 192.168.0.100. * The DHCP client is disabled. * The Access Point Name field is reset to the name printed on the label of the unit. For more information about the factory default settings, see Factory Default Settings on page 108. Use the Web Management Interface to Restore Factory Default Settings IMPORTANT: During the restoration process, do not try to go online, turn off the wireless access point, shut down the computer, or do anything else to the wireless access point until it finishes restarting! To restore the factory default settings using the web management interface: 1. Select Maintenance > Reset > Restore Defaults. The Restore Defaults screen displays: 2. Select the Yes radio button. By default, the No radio button is selected. 3. Click the Apply button. The wireless access point resets to the factory default settings. Management 59