Panasonic AG-HPX600PJ Operating Instructions - Page 122

Menu list Chapter 7 Menu Operations - Menu list [SCENE FILE] screen Item LOAD/SAVE/INIT VFR (OP4) FRAME RATE (OP4) SYNC SCAN TYPE SYNCHRO SCAN DETAIL LEVEL V DETAIL LEVEL DETAIL CORING CHROMA LEVEL CHROMA PHASE COLOR TEMP Ach COLOR TEMP Bch Description of settings Remark Loads, saves, or initializes the setting value of the scene file assigned to the current scene file number (one number among F1 to F6). [LOAD] Loads data saved in the built-in memory of the camera. [SAVE] Saves the current value in the built-in memory of the camera. ffThis setting change does not affect the scene files other than the current scene file number. ffThis setting is not available when clip connection is underway with one-clip recording. [INITIAL] Returns to the factory settings. Sets whether to allow variable frame rate (VFR). [ON] Activates the variable frame rate. [OFF] Does not activate the variable frame rate. Selects shooting interval and exposure time when the [VFR] item is [ON] in [1080i] and [720P]. [1080‑59.94i] Variable from [1] up to [30] frames (17 steps) [1], [2], [4], [6], [9], [12], [15], [18], [20], [21], [22], [24], [25], [26], [27], [28], [30] [1080‑50i] Variable from [1] up to [25] frames (14 steps) [1], [2], [4], [6], [9], [12], [15], [18], [20], [21], [22], [23], [24], [25] ffThis setting is not displayed when [SYSTEM MODE] is [480i], [576i], and [1080‑23.98PsF]. ffThis setting is not available when [SYSTEM MODE] is [1080i] and an item other than [60i] and [50i] is selected at [CAMERA MODE]. ffThis setting is not available when [REC SIGNAL] is [SDI IN]. ffThe screen may be disturbed momentarily when switched to 24 frames. ffThis item can also be set on the [CAM03:SETUP] screen of SmartUI [720‑59.94P] Variable from [1] up to [60] frames (25 steps) [1], [2], [4], [6], [9], [12], [15], [18], [20], [21], [22], [24], [25], [26], [27], [28], [30], [32], [34], [36], [40], [44], [48], [54], [60] [720‑50P] Variable from [1] up to [50] frames (25 steps) [1], [2], [4], [6], [9], [12], [15], [18], [20], [21], [22], [23], [24], [25], [26], [27], [28], [30], [32], [34], [37], [42], [45], [48], [50] Selects the synchro scan display setting. [sec], [deg] Displays the synchro scan shutter speed used for TV screen shooting. Continuous pressing of the jog dial button turned up or down will accelerate the speed to change the setting value. (page 56) rr When [SYNC SCAN TYPE] is [sec] [60i], [60P] [1/60.0] to [1/249.8] seconds [30P] [1/30.0] to [1/249.8] seconds [24P] [1/24.0] to [1/249.8] seconds [50i], [50P] [1/50.0] to [1/250.0] seconds [25P] [1/25.0] to [1/250.0] seconds rr When [SYNC SCAN TYPE] is [deg] When the [VFR] item is [OFF] Can be set with [3d] to [360d], and [0.5d] steps. When the [VFR] item is [ON] (OP4) Setting of the [FRAME RATE] item is more than 12P Can be set with [3d] to [360d], and [0.5d] steps. Setting of the [FRAME RATE] item is less than 12P Can be set with [3d] to [22.5d], and [0.5d] steps. [45d], [90d], [180d], [360d] Adjusts the level of the image outline correction (in the horizontal and vertical directions). [−7] ... [0] ... [+7] Adjusts the level of outline correction in the vertical direction. [−7] ... [0] ... [+7] Adjusts the level of noise reduction of the detail signal. [−7] ... [0] ... [+7] ffSetting in the − direction results in a clearer image, but increases noise slightly. ffSetting in the + direction reduces noise. Adjusts the chroma level. [−7] ... [0] ... [+7] Makes fine adjustments to the chroma phase. [−7] ... [0] ... [+7] Makes fine adjustments to the color temperature (after white balance Ach adjustment). [−7] ... [0] ... [+7] Makes fine adjustments to the color temperature (after white balance Bch adjustment). [−7] ... [0] ... [+7] indicates the factory setting value of scene file number F1. - 122 -