Panasonic AG-HPX600PJ Operating Instructions - Page 134

[DIAGNOSTIC] screen Chapter 7 Menu Operations - Menu list Item VERSION OPTION STATUS MODEL NAME SERIAL NO. OPERATION Description of settings Displays the version of all firmware in the camera. The version of each firmware can be checked by opening a sub-screen. (Sub-screen) [CAM SOFT] Camera microcomputer software [SYSCON SOFT] System control microcomputer software [P2CS BL2‑1] P2 control microcomputer boot program 1 [P2CS BL2‑2] P2 control microcomputer boot program 2 [P2CS KR] P2 control microcomputer kernel [P2CS AP] P2 control microcomputer application software [VUP] System software for updating all firmware of the camera [VUP FS] File system for updating the camera [CAM FPGA] Camera FPGA configuration ROM [BE FPGA] BE FPGA configuration ROM [PROXY SOFT] Proxy board software version display (OP1) [PROXY FPGA] Proxy board FPGA configuration ROM (OP1) [SDI IN FPGA] FPGA configuration ROM of the SDI signal input board (OP2) Indicates whether there is an optional board, and displays activated status of the upgrade software key. The following items are displayed on the sub-screen. [SDI IN BOARD] --- (with board: [ACTIVE], without board: ---) [PROXY BOARD] --- (with board: [ACTIVE], without board: ---) [PRODUCTION Activate: [ACTIVE] PACK] No: [----] [NETWORK FUNC.] Activate: [ACTIVE] No: [----] Displays the product name of the camera. Displays the serial number of the camera. Displays the operation time of the camera. Remark - 134 -