Panasonic WJ-HD716/1000 Operating Instructions - Page 54

Note: • To delete the set detection area, take the following procedures. 1. Move the cursor onto the [Area delete] button on the search filter window, and then press the [SET] button. 2. Move the cursor onto the [Area] button of any of the detection area (A - D), and then press the [SET] button. Step 5 After specifying the search conditions (filters), press the [SET] button after moving the cursor onto the [B] button. → Data matched the search conditions (filters) will be displayed on the VMD search list window. 4. Set the detection sensitivity of each detection area. Move the cursor onto "Sensitivity" of the detection area to be set, and then rotate the jog dial (inside) to select the detection sensitivity from the following. Off: Does not detect motion in the selected area. Low: Low sensitivity Mid: Standard sensitivity High: High sensitivity Step 6 Select time and date of recorded data from the list to play. To select a recorded data in which motion was detected, rotate the jog dial (inside). 5. Set the mask duration of each detection area. When the mask duration is set, any motion will not be detected for the set duration after a motion detection. Use the mask duration when it takes time to detect motion or when motion is detected frequently. Rotate the jog dial (inside) to select the detection sensitivity from the following. 1 s, 1 min, 1 h, 24h Note: • When the shuttle ring (outside) is rotated, the pre- vious/next page of the list will be displayed. 54