Panasonic WJ-HD716/1000 Operating Instructions - Page 68
Move a camera to the preset position, Step 1
View all Panasonic WJ-HD716/1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Move a camera to the preset position Move the camera to the preset position registered in advance. Step 1 Display the "Preset/Auto" window. (☞ Page 67) Step 2 Enter the preset position number to move the camera direction. The preset position number can be entered in the same manner as of the preset number registration (☞ page 67). When entering number "000", the camera direction will move to the home position. Note: • It is necessary to register the "Home" position by configuring the settings of the camera in advance. Step 3 Move the cursor onto the [Call] button, and then press the [SET] button. → The camera direction will move to the preset posi- tion corresponding to the entered preset position number. Step 4 To close the "Preset/Auto" window, press the [SET] button after moving the cursor onto the [Cancel] button or press the [SETUP/ESC] button on the front panel. 68