Panasonic WJ-HD716/1000 Operating Instructions - Page 96

Search for time and date when a motion was detected from recorded images and play (VMD search) Display a list of time and date when a motion was detected (by the VMD function) from images recorded by all the recording modes (☞ page 37), and then select a desired recorded image to play from the list. Camera channels, time and date, detection area and detection sensitivity can be used as the filters for the VMD search. Step 1 Display the top page of the operation window (☞ page 77), and then select the camera channel to be searched for in the [Cam. select] box. 1. Create a detection area by dragging the mouse. Up to 4 areas can be created and they will be area A, B, C and D in order or creation. Step 2 Click the [VMD] button in the [Search] box. → The VMD search filter window will be displayed. Step 3 Specify the search conditions (filters). Set detection area and detection sensitivity Up to 4 detection areas (A - D) can be set. Set detection areas and detection sensitivities for each of them as follows. Note: • To delete the created detection area, check the check box corresponding to the area to be deleted on the area setup window and then click the [Area delete] button. 2. Set the detection sensitivity of each detection area. Click the [C] button, and then set the detection sensitivity for each area (A - D) from the following. Off: Does not detect motion in the selected area. Low: Low sensitivity Mid: Standard sensitivity High: High sensitivity 96