Pioneer AVIC-Z110BT Owner's Manual - Page 110

Chapter 16 HD RadioäReception You can listen to the radio by using the navigation system. This section describes operations for HD Radio reception. p For details concerning operation, refer to the HD Radio tuner's operation manual. % Touch [Digital Radio] on the "AV Source" menu to display the "Digital Radio" screen. = For details concerning operations, refer to Screen switching overview on page 36. Using the touch panel keys 1 2 3 4 Reading the screen 12 3 4 56 7 8 9 a b 1 Source icon Shows which source has been selected. 2 Band indicator Shows which band the radio is tuned to: FM1, FM2, FM3 or AM. 3 Preset number indicator Shows what preset item has been selected. 4 Multicasting indicator Shows the number of multicast channels in the current frequency. 5 Frequency indicator 6 Current time 7 Detailed information = For details, refer to Switching the display on the next page. 8 Signal level indicator 9 Blending mode indicator = For details, refer to Switching the reception mode on page 112. a Signal type indicator Shows the type of signal currently being re- ceived. If a digital broadcasting is received, "D" appears. Otherwise, "A" appears. b Seek type indicator = For details, refer to Switching the seek mode on page 112. 1 Display the "Function" menu = For details, refer to Using the "Function" menu on the next page. 2 Select a preset channel [c] or [d] can be used to switch presets channels. 3 Perform manual tuning To tune manually, touch [c] or [d] briefly. The frequencies move up or down one step at a time. Perform seek tuning To perform seek tuning, touch and hold [c] or [d] for about one second and release. The tuner will scan the frequencies until a broad- cast strong enough for good reception is found. p You can cancel seek tuning by touching either [c] or [d] briefly. p If you touch and hold [c] or [d], you can skip broadcasting frequencies. Seek tuning will start as soon as you release the keys. p You can also perform these operations by using the TRK (c/d) button. 4 Select a band Touch [Band] repeatedly until the desired band is displayed: FM1, FM2, FM3 or AM. p This function is convenient for preparing different preset lists for each band. 110 En