Sharp MX-C300W Operating Guide - Page 145
A copy job stops before it is, The paper output tray is full.
![]() |
View all Sharp MX-C300W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
TROUBLESHOOTING Problem Paper misfeed. Copies are smudged or dirty. White or black lines appear on copies. Paper size for a paper tray cannot be set. A copy job stops before it is finished. The display turns off. Lighting fixture flickers. Cause and solution The bypass paper feed roller is dirty. → Clean the roller. The document glass or the underside of the document feeder is dirty. → Clean regularly. Original smudged or blotchy. → Use a clean original. The scanner glass for the document feeder is dirty. → Clean the long, narrow scanning glass. Press the [COPY] key to select copy mode. Copying or printing is performed. → Set the paper size after copying or printing is complete. The machine has stopped temporarily due to running out of paper or a misfeed. → Load paper or remove the misfeed, and then set the paper size. The paper output tray is full. → Remove the copies in the paper output tray and press the [COLOR START] key or [BLACK & WHITE START] key to resume copying. The tray is out of paper. → Load paper. Any other indicators turned off. → If other indicators are lit, the machine is in "Preheat mode". Press any key on the operation panel to resume normal operation. [ENERGY SAVE] indicator blinks. → The machine is in auto power shut-off mode. Press the [ENERGY SAVE] key to resume normal operation. The same power outlet being used is for the lighting fixture and the machine. → Connect the machine to a power outlet which is not used for other electric appliances. Page 164 163 - 164 - 11 19, 153 9 19 15 15 - 145
![](/manual_guide/products/sharp-mxc250-operating-guide-d437d13/145.png)