Sharp MX-C300W Operating Guide - Page 189

Polling Passcode # Mode When "Polling Security" is enabled, use this setting to program (or delete) the fax numbers of the machines that are allowed to poll your machine. Programmed fax numbers are called passcodes. Up to 10 fax numbers can be programmed. To check the programmed numbers, print the "List Print" (p.181). If you make a mistake, move the cursor to the mistake with the [ ] or [ ] keys and enter the correct number. Note To clear a passcode number, follow these steps: (1) Select "Delete" and then press the [OK] key. (2) Enter the control number that identifies the number you wish to clear, and then press the [OK] key. (3) Select "Delete" with the [ ] or [ ] key and then press the [OK] key. Scanner System settings for the scanner function are explained below. Select the [Scanner] to configure the settings. Disable USB Scan Select whether or not scanning from a computer and scanning from the machine are disabled when a USB connection is used. Default setting is "No" (disabled). New Default This is used to change the default settings for the original size, resolution, format, and scanning exposure in B/W mode. (For details, see "STORING SCANNING SETTINGS" (p.130).) • For details on each setting, see the pages below. "Original Size Enter" (p.130) "Resolution" (p.130) "Format" (p.131) "Mono2/Grayscale" (p.131) SYSTEM SETTINGS 189