Sharp MX-C300W Operating Guide - Page 21
Important points when inserting paper in the bypass tray, Important points when using envelopes
![]() |
View all Sharp MX-C300W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
BEFORE USING THE MACHINE Important points when inserting paper in the bypass tray • Up to 50 sheets of standard copy paper can be set in the bypass tray. • Be sure to place 5-1/2" x 8-1/2" or A6, B6 size paper or envelopes horizontally as shown in the following diagram. (When using the printer: Same as the direction for the 8-1/2" x 11" size paper, etc) Available Not available • When loading envelopes, make sure that they are straight and flat and do not have loosely glued construction flaps (not the closure flap). • Special papers except SHARP recommended transparency film, labels, and envelopes must be fed one sheet at a time through the bypass tray. • When adding paper, first remove any paper remaining in the tray, combine it with the paper to be added and then reload as a single stack. The paper to be added must be the same size and type as the paper already in the tray. • Use SHARP-recommended transparency film. • Do not use paper that is smaller than the original. This may cause smudges or unclean images. • Do not use paper that has already been printed on by a laser printer or plain paper fax machine. This may cause smudges or unclean images. Important points when using envelopes Envelopes that cannot be used Do not use the following envelopes. Envelopes misfeed, and smudges may result. • Envelopes with metal clasps, plastic hooks, or ribbon • Envelopes with an incorrectly aligned corner gluing hooks position on the back cannot be used as creasing • Envelopes closed with string may result. • Envelopes with windows or backing • Envelopes with an uneven front surface due to embossing • Double-layer envelopes • Envelopes with an adhesive for sealing • Hand-made envelopes Can be used • Envelopes with air inside • Envelopes with creases, fold marks, torn or damaged envelopes Cannot be used Print quality on envelopes • Print quality is not guaranteed in the area 13/32" (10 mm) around the edges of the envelope. • Print quality is not guaranteed on parts of envelopes where there is a large step-like change of thickness, such as on four-layer parts or parts less than three layers. • Print quality is not guaranteed on envelopes with adhesive for sealing. 21
![](/manual_guide/products/sharp-mxc250-operating-guide-d437d13/21.png)