Sharp MX-C300W Operating Guide - Page 163
Routine Maintenance, Checking The Total Output Count And Toner Remaining
View all Sharp MX-C300W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
7 ROUTINE MAINTENANCE This chapter explains how to keep the machine operating smoothly, including viewing copy count, and cleaning the machine. CHECKING THE TOTAL OUTPUT COUNT AND TONER REMAINING To check the total number of pages output in copy, print, and fax modes hold down the [COPY] key when the machine is in the standby state. The counts will appear while the key is held down. The total output count can be used as a guideline for cleaning. When the total output count exceed "99,999,999", the counts return to "0". The toner level is shown at the bottom of the screen. Note • You can also check by pressing the [SPECIAL FUNCTIONS] key and selecting "Total Count" in the function menu screen. • Each two-sided sheet that is output is counted as two pages. • Blank copies and blank prints are included in the count. • If the last page of a two-sided printing job is blank, it is not included in the count. ROUTINE MAINTENANCE Do not spray flammable cleaner gas. Gas from the spray may come in contact with the internal Warning electrical components or high-temperature parts of the fusing unit, creating a risk of fire or electrical shock. CLEANING THE DOCUMENT GLASS AND DOCUMENT FEEDER If the document glass, underside of the document feeder, or the scanner for originals coming from the document feeder (the long narrow glass surface on the left side of the document glass) become dirty, the dirt may appear on copies. Always keep these parts clean. Original scanning glass Stains or dirt on the document glass/document feeder will also be copied. Wipe the document glass, underside of the document feeder and the scanning window on the document glass with a soft, clean cloth. If necessary, dampen the cloth with water. Do not use thinner, benzene, or similar volatile cleaning agents. 163