Sharp MX-C300W Operating Guide - Page 160
Replacing The Toner Cartridge
![]() |
View all Sharp MX-C300W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
TROUBLESHOOTING REPLACING THE TONER CARTRIDGE When the "Prepare a new toner." appears, little toner remains. Be sure to replace the toner cartridge when the message "Change the toner cartridge." appears. If you continue to use the machine without replacing the cartridge, the following message will appear when the toner runs out. Note • If any one of the toner colors runs out (including black toner), color printing will not be possible. If Y, M, or C toner runs out but Bk toner remains, black and white printing will still be possible. • Be sure to install 4 toner cartridges (Y/M/C/Bk). Colors that are running low or have run out of toner are indicated in ( ). : Yellow toner : Magenta toner : Cyan toner : Black toner Replace the toner cartridges of the indicated colors. Warning • Do not throw the toner cartridge into a fire. Toner may splatter and cause burns. • Store toner cartridges out of the reach of small children. 1 Open the front cover. Push on both ends of the front cover and open it. Locations of color toner cartridges (A)(B) (C) (D) (A): Yellow (B): Magenta (C): Cyan (D): Black 2 Grasp the handle of the top and bottom of the toner cartridge, pull the toner cartridge out. After removing the toner cartridge, do not shake it or tap on it. Doing so Caution may cause toner to leak from the cartridge. Put the old cartridge immediately in the box of the new cartridge. Keep used toner cartridges (do not discard them). Note Your service technician will collect used toner cartridges. 3 Take out the new toner cartridge. Shake it vertically five or six times. When holding the toner cartridge, do not grasp the shutter. This may Caution cause toner to leak. 160
![](/manual_guide/products/sharp-mxc250-operating-guide-d437d13/160.png)