Sharp MX-C300W Operating Guide - Page 177
Wireless Infrastructure, Wireless Access Point, IP Addr. Distribution Range
View all Sharp MX-C300W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
SYSTEM SETTINGS Wireless (Infrastructure) (Only on models with wireless LAN) This sets connection using wireless infrastructure mode. Manual Input of SSID Enter up to 32 half-width characters for the SSID. Security Type Select the security type. (none/WEP/WPA Personal/WPA2 Personal) Setting of Encrypt Select the encryption method based on the "Setting of Security Type" setting. (none/WEP/TKIP/AES) Security Key Settings Set the security key used for wireless connection. WEP WPA Personal WPA2 Personal 5 half-width numeric digits, 10 hexadecimal (64 bit) digits, 13 half-width numeric digits, or 26 hexadecimal (128 bit) digits 8 to 63 half-width numeric digits or 64 hexadecimal digits Wireless (Access Point) (Only on models with wireless LAN) This sets connection using wireless access point mode. Setting of SSID Enter up to 32 half-width characters for the SSID. Security Settings • Security Type Select the security type. (none/WEP/WPA Personal/WPA2 Personal) • Setting of Encrypt Select the encryption method based on the "Setting of Security Type" setting. (none/WEP/TKIP/AES) • Security Key Settings Set the security key used for wireless connection. WEP WPA Personal WPA2 Personal 5 half-width numeric digits, 10 hexadecimal (64 bit) digits, 13 half-width numeric digits, or 26 hexadecimal (128 bit) digits 8 to 63 half-width numeric digits or 64 hexadecimal digits Device IP Address Settings Set the IP address of the access point. Channel Settings Set the channel used for the access point. Sending Output Settings Set the transmission output of the access point. Bandwidth Settings Set the frequency band of the access point. IP Addr. Distribution Range Set the lease range and lease period of the IP address used for the access point. 177