Sharp MX-C300W Operating Guide - Page 180
Energy Save
View all Sharp MX-C300W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
SYSTEM SETTINGS Key Touch Sound This setting is used to set the length of the key touch sound that is heard each time a key is pressed. The initial factory setting is "Short". Select the desired length with the [ ] or [ ] key. To turn the key touch sound off, select "Off". Keys Touch Sound At Initial Point This setting is used to select whether or not a beep will sound at preset base settings as you press a key to select a setting. The factory default setting is no beep. Key Press Time This setting is used to set the duration of time that a key must be pressed to take effect. A longer setting can be selected to prevent keys pressed accidentally from taking effect. Keep in mind, however, that when a longer setting is selected more care is required when pressing keys to ensure that the key input is registered. The initial factory setting is "Minimum". Disable Auto Key Repeat This setting is used to stop a setting from changing continuously when the [ ] or [ ] key is held down, such as when setting the zoom ratio or the original size (auto key repeat will not operate). When this setting is enabled, a key must be pressed repeatedly instead of holding it down. Auto key repeat is initially set to operate (factory default setting). Disable Paper Size Set This setting is used to disable "Paper Size Set" in the special functions menu. When disabled, "Paper Size Set" cannot be used when the [Special Function] key is pressed, which prevents users other than the administrator from easily changing the paper size setting. "Disable Paper Size Set" is initially disabled (factory default setting). Energy Save These settings are used to configure energy saving settings. To access one of these settings, select "Energy Save" in the mode selection screen, and select the desired setting in the energy save screen, and then press the [OK] key. Auto Power Shut-Off This setting is used to enable auto power shut-off mode, which automatically turns off the power to the fusing unit if the operation panel is not used for a certain duration of time. Enabling auto power shut-off mode helps conserve energy, preserve natural resources, and reduce environmental pollution. The function is initially enabled. Note Rather than disabling the auto power shut-off feature, it is recommended that you first try lengthening the time set in "Auto Power Shut-Off Timer" (see below). In most cases a suitable timer setting will allow work to proceed with minimal delay and still enable you to enjoy the benefits of power conservation. Auto Power Shut-Off Timer This setting is used to set the duration of time until auto power shut-off mode activates when the operation panel is not used. Using this function helps conserve energy, preserve natural resources, and reduce environmental pollution. "1 min.", "3 min.", "5 min.", "10 min.", "15 min.", "30 min.", "45 min." or "60 min." can be selected for the duration of time. Select a setting that suits your work conditions. Preheat Mode This setting is used to set the duration of time until preheat mode, which automatically lowers the fusing unit temperature, activates when the operation panel is not used. Using this function helps conserve energy, preserve natural resources, and reduce environmental pollution. "1 min.", "3 min.", "5 min.", "10 min.", "15 min.", "30 min.", "45 min." or "60 min." can be selected for the duration of time. Select a setting that suits your work conditions. 180