Brother International Entrepreneur PR-650 Users Manual - English - Page 105

Changing the Thread Spools with Designs of Seven or More Colors This section contains details on understanding the change thread spools message and on easily changing the thread spools. Change thread spools message When it is necessary to replace the thread spool while embroidering a pattern that contains seven or more colors, the machine automatically stops sewing and the message shown below appears. This message also appears when it is necessary to change the thread spools before beginning to embroider a new pattern. Change the thread spools according to their new assignments. 1 Memo ● To use a different thread color than the one that was specified, use the temporary needle bar setting key, and then change the thread color setting. (For details, refer to "Temporary Needle Bar Setting" on page 130.) ● To minimize changing the thread spools, frequently used thread colors can be specifically assigned to certain needle 3 bars. (For details, refer to "Reserved Needle Bar Settings" on page 132.) 2 3 1 The thread information for the thread spool needs not to be changed appears in gray. 2 The thread information for the thread spool to be changed appears in the new thread color and framed in red. 3 Touch this key to close the message indicating that the thread spool be changed. Note ● Touch needle bar key to move the needle into the correct position for threading into the new thread color. Refer to "Moving and threading a selected needle bar" on page 61. ● When the embroidering screen is displayed, the current thread color assignment is stored. If the same thread color is used the next time that the thread spools must be changed, the needle bar will be assigned the same thread color as before. Changing the Thread Spools with Designs of Seven or More Colors 103