Brother International Entrepreneur PR-650 Users Manual - English - Page 212

APPENDIX Appliqué Sewing This section describes the procedure for sewing appliqués. Sewing appliqué patterns Some of the built-in embroidery patterns can be used for sewing appliqués. Follow the procedures described below to sew appliqués using the patterns with "APPLIQUÉ MATERIAL", "APPLIQUÉ POSITION" or "APPLIQUÉ" in the region display at the top of the thread color sequence display. *Depending on the thread color display setting, the display may appear as (Appliqué Material), (Appliqué Position) or (Appliqué). Remove the appliqué fabric from the 3 embroidery frame, and then carefully cut along the sewn cutline. • If the appliqué is cut out along the inside of the sewn cutline, the appliqué may not be correctly attached to the fabric. Therefore, carefully cut out the appliqué along the sewn cutline. If this step is not performed carefully, the appliqué will not be cleanly finished. In addition, carefully remove any excess threads. Frame the base fabric or garment in the 4 embroidery frame, and then sew an "APPLIQUÉ POSITION" pattern. The appliqué position is sewn, and then the machine stops. ■ Procedure for sewing appliqués Place stabilizer on the back of the appliqué 1 fabric/material. Frame the fabric for the appliqué (from step 2 1) in the embroidery frame, and then sew an "APPLIQUÉ MATERIAL" pattern. The line that indicates where the appliqué will be cut out is sewn, and then the machine stops. 210