Brother International Entrepreneur PR-650 Users Manual - English - Page 236

APPENDIX Neatly align the teeth of the clamping frame 8 with the base of the brim. Adjust the other side in the same way. 9 1 Teeth of outside clamping frame 2 Base of brim Note ● Loosen the two screws for the outside clamping frame, and then adjust the position of the outside clamping frame so that it conforms to the shape of the cap and so that the teeth of the clamping frame perfectly align with the base of the brim. Close the lever of the snap lock. 0 1 Teeth of outside clamping frame 2 Base of brim 3 Outside clamping frame 4 Screws for the outside clamping frame 1 Lever of the snap lock Note ● If the cap fabric is thick and the clamping frame cannot be closed, or if the fabric is thin and the cap is too loose within the frame, loosen the screw for the inside clamping frame, and then adjust the inside clamping frame. 234 1 Inside clamping frame 2 Screw for the inside clamping frame