Brother International Entrepreneur PR-650 Users Manual - English - Page 60

EMBROIDERING TUTORIAL Pass the thread along the thread path 6 indicated on the machine, and then pass it under the number 1 middle thread guide plate. Pass the thread down through the slot to the 8 lower thread guide, and then through the hole in the number 1 lower thread guide. 1 Middle thread guide 2 Thread guide pin • The path from the upper thread guide around the thread tension disc and to the middle thread guide (steps 5 through 6) differs depending on the spool number. Passing the thread from the left to the right through the thread guide pins is designed to prevent the thread from becoming tangled. Thread each needle bar as shown in the illustration on page 57. Pass the thread along the number 1 slot to 7 pass it through the number 1 take-up lever hole from right to left. 1 Hole in lower thread guide Use the included threader to pass the thread 9 into the number 1 needle bar thread guide. 1 Thread take-up lever 58 1 Needle bar thread guide 2 Needle changing tool (Threader)