Brother International Entrepreneur PR-650 Users Manual - English - Page 235

Secure the stabilizer with the pins on the cap 3 frame. Align the centerline of the cap with the 5 notch in the mounting jig. 1 Pins • Make sure that the pins go through the stabilizer to firmly secure it. Lift up (flip) the sweat guard on the inside of 4 the cap, and then place the cap in the cap frame. Using both hands, hold both sides of the cap, and then align the edge of the lower frame with the base of the brim. 1 Centerline of cap 2 Notch in mounting jig Place the sweat guard of the cap inside the 6 notch in the cap frame. 1 Edge of the lower frame 2 Sweat guard 3 Base of the brim At the same time, align the centerline of the cap with the centerline of the sweat guard holder on the cap frame, and then slide the sweat guard under the sweat guard holder. 1 Notch in cap frame Close the clamping frame so that the brim of 7 the cap passes between the inside clamping frame and the outside clamping frame. 7 1 Sweat guard holder 2 Centerline of sweat guard holder 3 Centerline of cap 1 Brim of the cap 2 Inside clamping frame 3 Outside clamping frame Using the Optional Cap Frame 233