Brother International Entrepreneur PR-650 Users Manual - English - Page 31
Positioning the spool stand, Attaching the embroidery, frame holder
View all Brother International Entrepreneur PR-650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Positioning the spool stand Secure the spool stand in the embroidering position. Loosen the thumb screw, and then open up 1 the spool stand to the left and right. Attaching the embroidery frame holder Attach the embroidery frame holder to the carriage. 1 Remove the two thumb screws of the 1 embroidery frame holder. 1 Thumb screw 2 Spool stand After the spool stand is fully opened up, 2 tighten the thumb screw. 1 Thumb screws Align the holes in the embroidery frame 2 holder with the pins on the frame-mounting plate of the carriage. X Secure the spool stand in the opened position. 1 Pins on the frame-mounting plate 2 Holes in the embroidery frame holder Setting Up the Machine 29
Setting Up the Machine
29
1
—————————————————————————————————————————————————————————————————————————————————————
Positioning the spool stand
Secure the spool stand in the embroidering
position.
1
Loosen the thumb screw, and then open up
the spool stand to the left and right.
1
Thumb screw
2
Spool stand
2
After the spool stand is fully opened up,
tighten the thumb screw.
X
Secure the spool stand in the opened
position.
Attaching the embroidery
frame holder
Attach the embroidery frame holder to the carriage.
1
Remove the two thumb screws of the
embroidery frame holder.
1
Thumb screws
2
Align the holes in the embroidery frame
holder with the pins on the frame-mounting
plate of the carriage.
1
Pins on the frame-mounting plate
2
Holes in the embroidery frame holder