Epson Stylus Pro 10600 - UltraChrome Ink Printer Guide - Page 56
Setting Up Your Printer on a Network, Setting Up on a Macintosh Network
View all Epson Stylus Pro 10600 - UltraChrome Ink manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Setting Up the Printer | 1-41 Note This section tells you how to configure your printer as a shared printer on a network. To connect your printer directly to a network without setting it up as a shared printer, consult your network administrator. Setting Up Your Printer on a Network If your printer is connected over a network, follow the steps in the appropriate section to configure each client computer to share the printer: • "Setting Up on a Macintosh Network" on page 1-41 • "Setting Up on a Windows 95, 98, or Me Network" on page 1-43 • "Setting Up on a Windows XP Network" on page 1-46 • "Setting Up on a Windows NT 4.0 or Windows 2000 Network" on page 1-49 Setting Up on a Macintosh Network This section explains how to set up the Stylus Pro 10600 as a shared printer on an AppleTalk network. First install the printer software on every computer that will need to access the printer, as described on page 1-26. Then configure the host Macintosh (the computer to which you connected the printer) to share the printer, and configure the client Macintosh computers to connect to it, as described in the next two sections. Configuring the Host Macintosh Perform these steps on the Macintosh to which you connected the printer: 1. Turn on the printer, open the Chooser, and click the printer's icon. Then select the icon for the port your printer is connected to. 1-41